Toilet Leak Sensor Installation

Confirm that your Toilet Leak Sensor is assigned to the correct location by checking the unit on your Leak Sensor.

Turn off water to the toilet and drain the water

Turn the toilet supply line valve off and flush toilet until tank is empty, then remove supply line

Assemble and attach the Toilet Leak Sensor

Attach adapter to toilet and attach Flow Sensor to adapter

Reconnect the supply line to the Flow Sensor

Connect to the LS4 to the NextCentury Cloud

Connect the cable from the Flow Sensor to the Leak Sensor then

Flush the toilet and confirm a blue pulse on the Leak Sensor

Check-in the Leak Sensor to confirm connection to Gateway

Mount the Leak Sensor behind the toilet using the double-sided tape pre-attached to the Leak Sensor.

Make sure to clean the surface of the wall prior to mounting.