Unit Details: Programming and Edits
Roles: Technician, Billing Manager
Last Updated: April 2020
This article outlines programming on the Unit Details page. The Unit Details page allows changes for one unit at a time including:
- Device serial numbers
- Utility types
- Descriptions and notes
- Meter Types and multipliers
For viewing device and utility usage information see, Unit Details: Viewing Usage and Device Info
Programming Devices
From the property Equipment page, find the unit and select Program a Device
Select the corresponding utility type for the initial device you wish to program.
Enter a device serial number and initial meter read (IMR).
Enter a Remote Reader serial number and select the meter signal type. Enter the initial meter read. If configuring a second meter, select "+ Add Meter on Port 2".
Program a 3rd party device as you would a Transceiver:
- Enter the 3rd party device serial number.
- Enter the initial meter read.
- Select the meter manufacturer and model information along with the multiplier.
- Enter meter serial number and custom ID (optional).
- Select "Save Unit" to save the changes.
For programming multiple 3rd party device, see Easy upload for programming 3rd party properties
Enter the meter type and multiplier into the Meter Type Builder and select “Save”.
Enter meter serial number and custom ID, if desired.
Select “Save Unit” to save changes. Select "Cancel" to discard any changes.
Adding Additional Utilities
Select “Edit Unit” from the Unit Details page.
Select “+ Add a New Meter” and then select the utility type that you wish to add.
Enter information for the newly added utility type. Select "Save Unit" to save the changes.
Adding Descriptions and Comments
Select “Notes” from the Unit Details page.
To add a description enter a description and select "Save". To add a comment submit a comment and select the "+". Select "Close" when done.