RR301-TR Remote Reader Installation
Last updated: September 2020
This article outlines the process for installing the RR301-TR Remote Reader.
|A - RR301-TR Remote Reader
B - Mounting Plate
|C - Sheetrock Anchors
D - Wall Mount Screws
|E - Box Mount Screws
F - Wire Security Assembly
G - Security Seal Tabs
Pull down the security tab to remove the Remote Reader from the mounting plate.
Feed wires through the mounting plate and connect them to the terminals for meter 1 and meter 2.
Use the provided wiring guide and wire according to the meter type you are installing. Click the wiring guide below for a larger view.
With the provided hardware, secure the mounting plate to the wall.
Align the Remote Reader with the mounting plate and press down. Then lock the security tab in place.
Use this configuration method when a Cloud-connected Gateway and Repeaters have already been installed.
For cloud programming, see Unit Details: Programming and Edits
Use this configuration method when a cloud-connected Gateway is not yet available.
For Direct Connect programming, see Direct Connect Programming