Overview
Waterproof kit for splicing wires between outdoor devices.
A proper, long-lasting connection between two outdoor devices is made possible with the Next Meters Field Splice Kit, ensuring that your equipment keeps working at its best. The Splice Kit has a waterproof and submersible design, is quick to install, and is built for long-term maintenance-free operation. It allows up to three wired connections between two devices in any outdoor wiring application.
Specifications
Physical and power
| Dimensions | 3.3in x 1.8in x 1.3in (84mm x 46mm x 33mm) |
|---|---|
| Operation Environment | -29°C to 65°C (-20°F to 150°F) Can be installed outdoors |
Certifications
| Certifications | IP-Rating: IP68 |
|---|
More details
| Compatibility | Up to 3 wire connections 18 - 24 AWG wire |
|---|---|
| In-Field Installation | Simple field installation—small flat-head screwdriver required |
Installation
A - Set of Splice Kit Shells
B - Wire Connector
Install the device
Strip and Connect Wires
Ensure that the wires are a compatible gauge and width
Strip 3/16” of sheathing from each wire end, connect each wire to the Connector, and tighten.
Align Connector
Place the Wire Connector into the shell using the post in the center. Channel the wires into the grooves.
Seal Shut
Test wired connections before sealing. Ensure all four clips are engaged and apply pressure.