Turn on alerts and set up notifications

Choose which alerts are on, for one property or for all your properties, and who gets notified when new alerts come in. For what each alert means, see Health and security alerts.

Turn alerts on

One propertyAll properties

Open the property, then select Alerts in the property menu.

Web portal with a property open. A red arrow points to Alerts in the left menu, between Reports and Live Feed. The Alerts page opens on the Alerts tab, which lists the property's active alerts: here, Battery alerts (Battery level is getting low) for several units, with the utility and date of each. The Settings and Notifications tabs are at the upper right, next to Alerts.

Select the Settings tab.

The property's Alerts page with the Settings tab selected: a red arrow points to Settings at the top of the page, between the Alerts and Notifications tabs. Under Equipment Health Alerts, each alert has a description, a toggle, and a gear icon: Tamper (Automatically detect when someone tampers with your equipment), Connection (Be informed when equipment goes offline), Power Loss (Be alerted when your equipment is unplugged from power), and Battery (Know exactly when batteries start running low). All four toggles are on, and Tamper also has a moon icon.

Turn on the toggle for each alert you want.

Animation: on the Settings tab, the pointer selects the toggle next to Tamper, and the toggle turns from gray to blue, so the alert is on. The Connection toggle below it is already on.

Add a notification contact

Contacts get notifications summarizing any new alerts. Add them on a property's Alerts page to hear about that property, or on the Alerts page in the Home menu to hear about all your properties.

Open the Alerts page: for one property, open the property and select Alerts in the property menu. For all properties, select Alerts in the Home menu.

Select the Notifications tab.

A property's Alerts page with the Notifications tab selected: a red arrow points to Notifications at the upper right, next to Alerts and Settings. A gray banner explains that contacts here will receive notifications summarizing any new alerts for the property. Below, the Alert Contacts list has one contact, Next Century Support (support@nextcenturymeters.com), marked Subscribed to NextCentury notifications, and a blue + Add New Contact button.

Select + Add New Contact.

The Alert Contacts list on the Notifications tab, with a red arrow pointing up at the blue + Add New Contact button below the list.

Enter the contact's name and email, and a phone number if they should get texts, then select Save. The phone number is only used to text time-critical alerts.

The Add New Contact window, with fields for NAME*, EMAIL*, and PHONE (optional), filled in for an example contact. Under the phone field: Note: Phone will only be used for texting time-critical alerts. Below that is a Show Advanced Settings link, and a red arrow points down at the Save button in the lower-right corner, next to Cancel.

Choose which alerts a contact gets

On the Notifications tab, select the gear icon next to the contact.

The Notifications tab on a property's Alerts page, with two contacts under Alert Contacts: Next Century Support, and the contact just added, shown with an email address and phone number. A red arrow points up at the gear icon at the right end of the new contact's row.

Select Show Advanced Settings, check the alerts the contact should get, then select Save.

The contact's window with advanced settings open: a red arrow points to the Hide Advanced Settings link (it says Show Advanced Settings until you select it). Below it, Select which alert notifications you would like this contact to receive, with two columns of checkboxes: Equipment Health (Tamper, Connection, Power Loss, and Battery, all checked) and Smart Security (Temperature and Consumption checked; Water Leak Sensor unchecked and grayed out). A second red arrow points down at Save in the lower-right corner.

Due to updated regulations and product improvements, Next Meters reserves the right to change the product specifications without notice.