A - TR4-X (Qty:50)
B - Screws #6-20 (Qty:50)
C - Sheetrock Anchors (Qty: 100)
D - Activation Magnet (Qty: 1)
Installation
1. Wire Meter
Splice the meter's output wires to the TR4-X Transceiver's input wires.
Note
When splicing TR4-X wire connections, be sure to use a waterproof splice kit such as the NextCentury Field Splice Kit.
2. Check Configuration
Hold the magnet to TR4-X for 5 seconds to enter Configuration Mode.
The meter LED will display a solid color to show the current meter type configuration.
Swipe the magnet to toggle between Pulse Meter (blue) and Encoded Meter (red) configurations.
3. Mount
Align and mark mounting holes for the TR4-X outdoor Transceiver
Pre-drill holes if necessary
Using the included hardware, attach the TR4-X outdoor Transceiver.
Secure the Pit Mount to the lid using the included nut
Then screw the TR4-X Transceiver onto the mounting point
The lid can now be placed over the pit
4. Verify Transceiver Communication